What does a concrete kerbstone mould do?
Kerb manufacturers need specially designed kerb moulds to produce concrete kerb stones. Curb moulds are designed according to the characteristics of the curb to be produced and are generally designed for horizontal production. According to changing user requests, kerb mould models in standard sizes have been developed. Concrete kerb stones, especially used in gardening and landscaping works, add elegance and grace to the environment. CONMACH manufactures and exports standard concrete kerb moulds. These moulds can be easily used in concrete block machines produced by our company. 

 Concrete Curbstone Mould Maintenance and Cleaning
Maintenance and cleaning of the concrete kerbstone mould is important for the long life and efficient use of the mould. This requires regular cleaning and maintenance. These moulds should be cleaned of concrete residues after each use. For the long life of the mould, the remaining concrete pieces should be cleaned with a spatula, brush or compressed air. In addition, curbstone mould surfaces should be cleaned with mould release agent or similar products and prepared for the next use. Again, mould release products should be applied to the mould surfaces to prevent concrete adhesion. Finally, attention should be paid to the control and maintenance of the moulds, and if there is wear, deformation or damage to the mould parts, the problem should be solved.

​

 Features to be Considered

•     Moulds must be resistant to mechanical and chemical effects that will be encountered in intensive use.

•     They must be manufactured from materials (steel, aluminium, etc.) resistant to abrasion, deformation and damage.

•     Moulds should be easy to manufacture, assemble and maintain.

•     It should be practical to assemble, disassemble and clean the parts.

•     Mould dimensions must be precise in order to ensure that the curbstones to be produced conform to the desired dimensions.

•     Dimensional tolerances must be in accordance with standards and customer requirements.

•     Mould surfaces should have coatings that prevent concrete adhesion and facilitate removal.

•     Safety precautions must be taken for operators during the use of the mould.

•     Risks such as moving parts, sharp edges etc. should be minimised.

These features ensure effective, efficient and safe use of concrete kerb moulds.

​